Re: A89: official 89 asm info.
[Prev][Next][Index][Thread]
Re: A89: official 89 asm info.
Wow. This guy has really got to learn to spell...
---Jerzy Tanski <jtanski@provide.net> wrote:
>
>
> !!!!!!!!!!!!!!!!!!!!!
> I got this email from ti. don't get pissed or write them.
> !!!!!!!!!!!!!!!!!!!!!!!!!!
>
>
>
> Thank you for your continued e-mail.
> The *un*official word is that it should be ready within the next two
> weeks.
> I suggest that you check periodically at www.ti.com/calc/docs/89.htm
for
> more information and updates.
>
> I hope you find this information helpful. If you have any further
> questions
> or comments please feel free to contact me at your convenience.
>
> Sincerely,
>
> Samson Craft
>
> Visit the TI World Wide Web home page:
>
> www.ti.com/calc
>
> --------------------------------------------------------------------
> Educational & Productivity Solutions
>
> Customer Support Center Email: ti-cares@ti.com
> Texas Instruments or
> PO Box 650311 M/S 3962 scraft@ti.com
> Dallas, TX 75265 Phone: 1-800-842-2737 General
> Information
> 1-972-917-8324 Technical
> Information
> --------------------------------------------------------------------
>
>
> ========================= ORIGINAL MESSAGE ==========================
>
> [ jtanski@provide.net on 10/23/98 8:09:02 PM ]
>
> I'm wery disapointed in you because, i realy didn't buy the calculator
> to
> play games or do math. It was because i was going to write programs
for
> it
> in my spare time. It seamed like a quite good platform, it's not as
big
> as
> 92, you can carry it to school, it has more memory, assemebly
> programation
> (key point here). Well i would be interested about (+- 2 months) it
will
> be
> aout. Second of all is there a a good cross assembler i could use
and a
> linker, any one. I could posibly figure out some stuff with having the
> write
> software. Any info would help like the rom calls, i'm not interasted
in
> using one of the asm shell out there, because all of the are still in
> beta
> faze and the calc is soposed to run the maching code. I'm also
> interasted
> if
> there is going to be some info on TSR programs. I might pose these
> emails
> on
> TIcalc.org because a lot of people are mad jus tlike me.
> > -----Original Message-----
> > From: banderson@ti.com [mailto:banderson@ti.com]
> > Sent: Thursday, October 22, 1998 2:45 PM
> > To: jtanski@provide.net
> > Subject: RE: TI-89 ASM
> >
> >
> >
> > Thank you for your message. Unfortunately, I don't have any
> > TI-89 assembly
> > programming information because it has not been completed yet. As
soon
> as
> > this information is complete, we will place it on our web site at
> >
> > http://www.ti.com/calc/docs/89.htm
> >
> > I regret that I cannot offer you any more information than that,
but I
> > simply do not have an announced time for the assembly
documentation to be
> > released.
> >
> > If you have any further questions or comments please feel free to
contact
> > us at your convenience. For faster service on replies, copy this
message
> > in the response, and send the response directly to
ti-cares@ti.com. Also,
> > please address your response to me (i.e. place my name at the top
of your
> > reply or at the end of the subject line).
> >
> > Best Regards,
> >
> > Brigette Anderson
> >
> >
------------------------------------------------------------------------
> > Educational & Productivity Solutions
> > Texas Instruments Email: ti-cares@ti.com
> > PO Box 650311 M/S 3962 Phone: 1-800-TI-CARES or
> > Dallas, TX 75265 (972)917-8324 (technical
help)
> > Internet: http://www.ti.com/calc/ FAX: (972) 917-0747
> > http://www.ti.com/organizers/
> >
------------------------------------------------------------------------
> >
> >
> > ========================= ORIGINAL MESSAGE
==========================
> >
> > [ jtanski@provide.net on 10/22/98 6:14:09 PM ]
> >
> > > -----Original Message-----
> > > From: banderson@ti.com [mailto:banderson@ti.com]
> > > Sent: Wednesday, October 21, 1998 2:24 PM
> > > To: jtanski@provide.net
> > > Subject: Re: TI-89 ASM
> > >
> > >
> > >
> > > Thank you for your recent E-mail. We appreciate your support of
our
> > > products. We feel that getting the calculator hardware to the
market as
> > > quickly as possible is our first priority and so we dedicate our
> > resources
> > > to that task rather than to some of the peripheral tasks such
> > as assembly
> > > information. Now that the TI-89 and TI-92 Plus have been
released, our
> > > engineers have turned their efforts toward completing this
> > documentation.
> > >
> > > I sincerely regret any inconvenience that not having this
> > information may
> > > cause you. We realize that the assembly programming abilities are
> > > important to our customers and we are striving to prepare this
> > information
> > > as quickly as possible.
> > >
> > > If you have any further questions or comments please feel free
> > to contact
> > > us at your convenience. For faster service on replies, copy
> > this message
> > > in the response, and send the response directly to
> > ti-cares@ti.com. Also,
> > > please address your response to me (i.e. place my name at the
> > top of your
> > > reply or at the end of the subject line).
> > >
> > > Best Regards,
> > >
> > > Brigette Anderson
> > >
> > >
>
------------------------------------------------------------------------
> > > Educational & Productivity Solutions
> > > Texas Instruments Email: ti-cares@ti.com
> > > PO Box 650311 M/S 3962 Phone: 1-800-TI-CARES or
> > > Dallas, TX 75265 (972)917-8324 (technical
help)
> > > Internet: http://www.ti.com/calc/ FAX: (972) 917-0747
> > > http://www.ti.com/organizers/
> > >
>
------------------------------------------------------------------------
> > >
> > >
> > > ========================= ORIGINAL MESSAGE
==========================
> > >
> > > [ jtanski@provide.net on 10/17/98 3:16:53 PM ]
> > >
> > > I wan't to write programs in asmembly for my TI-89 calculator
but there
> > > is no guide or help for doing so. Plses help
> > >
> > >
> > >
> > >
> > I greatly need asm, calls and help. Plese don't send me the 89 asm
wizard
> > mesage. I bouth the calculator mainly because asm is built in and
it's
> > powrfull procesor, which is very good for asm, programing.
> >
> >
> >
> >
> >
>
==
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
| Jeremy Moore |
| senoramor@yahoo.com |
| ICQ: #18766049 |
| http://fly.to/favelinks |
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+
"Did somebody say McDonald's?" --Every freakin' commercial.
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com