Re: A86: putsprite
[Prev][Next][Index][Thread]
Re: A86: putsprite
-----Original Message-----
From: Walter DAO <wdao@netcom.com>
To: assembly-86@lists.ticalc.org <assembly-86@lists.ticalc.org>
Date: Sunday, September 13, 1998 3:29 AM
Subject: Re: A86: putsprite
>
>>
>>
>> ok,
>>
>> I got putsprite, edited it to fit my needs(Its not copyright is it?
wait
>> dont respond to that, I dont want to go into that copyright crap again)
>>
>> I converted it to HEX and copyed it to my calc. I made sure I double
checked
>> EVERYTHING in the HEX code. I ran it on my calc but it came up with some
>> error(it didn't crash my calc)
>>
>> I made sure that it worked before I put it on my calc by running the asm
file
>> in ti86emu. I ran fine and did what I wanted it to. but It didn't do it
on
>> my calc. I am wondering if it was the conversion that screwed it all
up.
>> could this be?
>>
>> Below is the code:
>
>you have to assemble it !!
>The TASM package will do the job as well as a few other ones.
>
> Walt
>
>
He is using ASMStudio and the fact that he can run it on an emulator
tells you that it is assembled.
--------------
Jbrett
tbarwick@esn.net
http://ww2.esn.net/~tbarwick
I just added a TI-86 page, Check it out!!!