Re: A86: more on writing/running an asm prog.


[Prev][Next][Index][Thread]

Re: A86: more on writing/running an asm prog.




But the CGI is almost foolproof.
--------------
Jbrett
tbarwick@esn.net
http://ww2.esn.net/~tbarwick
I just added a TI-86 page, Check it out!!!
-----Original Message-----
From: Bryan Rabeler <brabeler@ticalc.org>
To: assembly-86@lists.ticalc.org <assembly-86@lists.ticalc.org>
Date: Thursday, September 10, 1998 6:36 PM
Subject: Re: A86: more on writing/running an asm prog.


>
>That is still technically illegal.
>
>--
>Bryan Rabeler <brabeler@ticalc.org>
>   File Archives, News, Features, Newsletter, and HTML
>   the ticalc.org project - http://www.ticalc.org/
>
>On Thu, 10 Sep 1998, Andy Johnson wrote:
>
>>
>> At 03:11 PM 9/10/98 -0400, you wrote:
>> >
>> >BlAsTo1414@aol.com wrote:
>> >>
>> >> ok,
>> >> if I got a prog on my pc and wrote the asm code there, could I
>> eventually > copy
>> >> the code over to my 86 by the same way you would basic code?  like
print it
>> >> out from my pc and just copy it by hand to my 86?
>> >
>> >Um, sorta. You'd have to copy the hex codes of the compiled program.
>> >That would be long and hard and one little mistake could be absolutely
>> >disastrous. You cannot type in the raw code like in BASIC.
>> >
>> >> but if I did that, i dont
>> >> want to be canstantly copying new code to my 86.  is there a way to
run asm
>> >> progs on my pc, before i copy them to my 86?
>> >
>> >Yes, use an emulator, which requires a ROM dump. However, to get a ROM
>> >dump, you need to dump your own ROM, because using somebody else's is
>> >illegal. However again, to get a ROM dump, you need the Link. There is
>> >no other way.
>>
>> There is another way.  Go to
>> http://www.dogtech.com/cybop_cgiwin/optic.exe?ROMdownload, you enter a
>> small asm program to verify you do indeed have a calc, and you can
download
>> a copy of the rom to run on the emulator.
>> --
>> Andy Johnson <prjohnson@utahlinx.com>
>>
>
>


Follow-Ups: