Re: A85: Simple Program, not so simple problem.....

[Prev][Next][Index][Thread]

Re: A85: Simple Program, not so simple problem.....



Pardon my lack of knowledge here, but what exactly would I add to the header 
file? All the other lines have hex addresses (i think) and other numbers. 
Does anyone know exactly what I would type in? Thanks!

-Micah Gibson
ulic28@hotmail.com

----Original Message Follows----
From: "Dines Justesen" <dines@aub.dk>
Reply-To: assembly-85@lists.ticalc.org
To: <assembly-85@lists.ticalc.org>
Subject: Re: A85: Simple Program, not so simple problem.....
Date: Mon, 22 Nov 1999 17:36:48 +0100


If it is not there then just define it your self (exit is key # 37).

DInes

BTW The list of keys can be found in ti-rom11.txt
----- Original Message -----
From: Micah The Great <ulic28@hotmail.com>
To: <assembly-85@lists.ticalc.org>
Sent: 22. november 1999 07:05
Subject: Re: A85: Simple Program, not so simple problem.....


 >
 >
 > You're right. I checked the ti-85.h file last night to see if the K_EXIT
had
 > been misspelled or something in my program, but I couldn't even find it. 
I
 > just double-checked and it's not there. Do you know what I could do to 
fix
 > it? Is there another header file that defines K_EXIT? Or should I be 
using
 > something else? Thanks!
 >
 > -Micah Gibson
 > ulic28@hotmail.com
 >
 > ----Original Message Follows----
 > From: JayEll64@aol.com
 > Reply-To: assembly-85@lists.ticalc.org
 > To: assembly-85@lists.ticalc.org
 > Subject: Re: A85: Simple Program, not so simple problem.....
 > Date: Sun, 21 Nov 1999 23:04:34 EST
 >
 >
 > In a message dated 11/21/99 9:02:12 PM Mountain Standard Time,
 > ulic28@hotmail.com writes:
 >
 >  > I hope I'm sending this email to the correct address.....anyway, can
 > anyone
 >  >  tell me why, upon compilation, TASM gives me two errors in the
following
 >  >  program:
 >  >
 >  >
 >  >  #include "ti-85.h"
 >  >
 >  >  .org 0
 >  >  .db "My first program!",0
 >  >
 >  >  ROM_CALL(CLEARLCD)
 >  >  ld hl,0
 >  >  ld (CURSOR_ROW),hl
 >  >  ld hl,Text
 >  >  ld de,(PROGRAM_ADDR)
 >  >  add hl,de
 >  >  ROM_CALL(D_ZT_STR)
 >  >  WaitKey:
 >  >  call GET_KEY
 >  >  cp K_EXIT
 >  >  jr nz,WaitKey
 >  >  ret
 >  >
 >  >  Text:
 >  >  .db "Hello World!",0
 >  >
 >  >  .end
 >  >
 >  >
 >  >  The two errors ae as following:
 >  >  it.asm line 0015: Label not found: (K_EXIT)
 >  >  it.asm line 0015: Unused data in MS byte of argument. (200)
 >  >
 >  >  The program still compiles though. I transfer it to my 85, try to run
 > it,
 >  >  and it just sends me straight back to ZShell, as if nothing ever
 > happened.
 > I
 >  >
 >  >  copied this program from Jimmy Mardell's old ZShell School lesson #1.
 > And
 >  >  assistance in solving this (probably simple) problem would be much
 >  >  appreciated. Thanks!!
 >
 > Maybe a bad ti85.h file???  Check to make sure K_EXIT is actually defined
in
 > there.
 >
 > JayEll
 >
 >
 >
 > ______________________________________________________
 > Get Your Private, Free Email at http://www.hotmail.com
 >



______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Follow-Ups: