[A83] Re: Replacement for "PushOP1" and "PopOP1" for TI83
[Prev][Next][Index][Thread]
[A83] Re: Replacement for "PushOP1" and "PopOP1" for TI83
Thank you very much! It helped me a lot!
Valio
>
> Skim through the squish.inc file in the following zip. You'll find most,
if
> not all of the available rom calls on the TI83.
>
> http://www.ticalc.org/pub/83/asm/programs/squish.zip
>
> For documentation about those rom calls, you should get the TI83+
Developer
> Guide.
>
> ----- Original Message -----
> From: "Patrick Mächler" <valio@bluewin.ch>
> To: <assembly-83@lists.ticalc.org>
> Sent: Monday, November 26, 2001 22:48
> Subject: [A83] Re: Replacement for "PushOP1" and "PopOP1" for TI83
>
>
> >
> > Cool man! Thank you very, very much! Now I'm finally able to
> > complete my TBasic-compiler (Schoolproject)!
> > You don't know maybe other undocumented interesting
> > Op Rom calls, do you?
> >
> > Greetings
> >
> > Valio
> >
> >
> > > _POPOP1 equ 44E6h
> > > _PUSHOP1 equ 454Ah
> > >
> > > > From: "Patrick Mächler" <valio@bluewin.ch>
> > > >
> > > > Hi!
> > > >
> > > > I read about the romcalls "PushOp1" and "PopOp1" for the TI-83+.
> > > > "PushOp1" determines wether Op1 is a Complex or a real and
> > > > push the whole number onto the FPS.
> > > > "PopOp1" does exactly the same in the other way round.
> > > >
> > > > Does anybody know if there is such a (maybe undocumented) romcall
> > > > for the TI83? Or does maybe someone know how to built a similar
> > > > command?
> > > >
> > > > thx for all answers in advance
> > > >
> > > > Valio
> > > >
> > > > p.s.: excuse my English! I'm Swiss...
References: