Re: A83: TI-83+ Assembly Programs

[Prev][Next][Index][Thread]

Re: A83: TI-83+ Assembly Programs


It still won't work.  I get ERR:INVALID when I try to run it.  I think I
must be doing something wrong.  Could someone check out this program and
see if it works for them, or just tell me if there is something I'm doing 
wrong?  I copied the BCALL macro from the ion.inc file instead of using
the ti83plus.inc version's original form because the original form gave me
errors in TASM.  The line is #define bcall(xxxx)     rst 28h \ .dw xxxx

Thanks
Jeremy


.NOLIST                 ; Defines area which isn't code.
#define end .end
#define END .end
#define equ .equ
#define EQU .equ
#include "ti83plus.inc"
.LIST                   ; Defines area which IS code.
.org userMem
    bcall(_clrLCDFull)
    ld hl,0000h
    ld (PENCOL),hl
    ld hl,str1
    bcall(_vputs)
    ld hl,0001h
    ld (CURROW),hl
    ld hl,0000h
    ld (CURCOL),hl
    ld hl,str2
    bcall(_puts)
    ret
str1:
    .db "This is small writing.",0
str2:
    .db "This is big.     ",0
.end
END


On Sun, 20 Feb 2000, Robin Kay wrote:

> 
> 1) Make sure you have tasm, ti83plus.inc and devpac83* all in the same directory.
> 2) Create the file asm83p.bat at put the following in it:-
> 
> @echo off
> tasm -80 -i -b %1.asm %1.bin
> devpac83 %1
> del %1.bin >nul
> del %1.8xp >nul
> rename %1.83p %1.8xp >nul
> 
> 3) Then type 'asm83p ' followed by the name of the source file excluding extension
> 
> 4) Use the graphlink cable and software to send send the resulting .8xp file to
> your calculator
> 5) Press**: 2ND - 0 - Scroll down to 'Asm(' - ENTER - PRGM - Select the program -
> ENTER - ENTER
> 
> * You can get this from ticalc, I think...
> ** This equates to: Asm(prgmNAMEOFPROGRAM
> 
> Jeremy wrote:
> 
> > Thanks.  Now how do i get it onto my calculator?
> >
> > Jeremy
> >
> > On Sat, 19 Feb 2000, Robin Kay wrote:
> >
> > >
> > > You need to use bcall(xxxx) instead of call xxxx. For example:
> > >
> > >  bcall(_clrLCDFull)
> > >
> > > --Robin Kay--
> > >
> > > Jeremy wrote:
> > >
> > > > I converted a sample program from the ASMGURU file to 83 plus, but it
> > > > won't work.  I don't know how to get it from the ASM to something the
> > > > calculator can run and how to get the calculator to run it.  I have TASM
> > > > 3.01.  How do I get an ASM program to work on the 83 Plus?  I put the code
> > > > below, so if I missed something I need, let me know.
> > > >
> > > > Thanks
> > > > Jeremy
> > > >
> > > > .NOLIST                 ; Defines area which isn't code.
> > > > #define end .end
> > > > #define END .end
> > > > #define equ .equ
> > > > #define EQU .equ
> > > > #include "ti83plus.inc"
> > > > .LIST                   ; Defines area which IS code.
> > > > .org userMem
> > > >
> > > >     call _clrLCDFull
> > > >     ld hl,0000h
> > > >     ld (PENCOL),hl
> > > >     ld hl,str1
> > > >     call _vputs
> > > >     ld hl,0001h
> > > >     ld (CURROW),hl
> > > >     ld hl,0000h
> > > >     ld (CURCOL),hl
> > > >     ld hl,str2
> > > >     call _puts
> > > >     ret
> > > > str1:
> > > >     .db "This is small writing.",0
> > > > str2:
> > > >     .db "This is big.     ",0
> > > > .end
> > > > END
> > >
> > >
> 
>
References: