Basics Archives Community Services Programming
Hardware Help About Search Your Account
   Home :: Archives :: File Archives :: Calculate loads on sling angle on 4 way pick
Calculate loads on sling angle on 4 way pick


Ranked as 31807 on our all-time top downloads list with 982 downloads.
Ranked as 10985 on our top downloads list for the past seven days with 1 downloads.

Filename slnglod4.zip (Download)
Title Calculate loads on sling angle on 4 way pick
Description This program calculates the sling load for wire rope on a 4 way pick (4 slings from one hook). Diameters from 1/4 inch to 1 and 1/2 inch. Above 1 inch use decimals for the diameter entry. Below 1 inch use fractions. The calculations are based on standard SWL (safe working load) using a safety factor of 5. Before using this enter examples to verify that program is correct. USE AT YOUR OWN RISK. Thanks
Author Mike S (lazyrockinh@hotmail.com)
Category TI-83/84 Plus BASIC Science Programs (Physics)
File Size 471 bytes
File Date and Time Sun Dec 10 06:03:54 2006
Documentation Included? No


There are no reviews for this file.


Questions, comments, and problems regarding the file itself should be sent directly to the author(s) listed above.

Write a review for this file (requires a free account)

Report inappropriate or miscategorized file (requires an account; or you may email us directly)

If you have downloaded and tried this program, please rate it on the scale below
1  2  3  4  5  6  7  8  9  10  


Archive Contents
Name Size
SLNGLOD4.8XP   796

  Copyright © 1996-2012, the ticalc.org project. All rights reserved. | Contact Us | Disclaimer